MS2115 Slotted

Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 1.4404 (316L) = SS

Loads not applicable to stainless steel, loads for stainless steel available upon request.

6mtr channel is a stock length to be cut down to suit.

Load tables have been calculated using 28×14 slots as this is a worst case.

Area cm²	Wt kg/m	Ixx cm⁴	Zxx (top) cm³	Zxx (btm) cm³	rxx cm	Iyy cm⁴	Zyy cm³	ryy cm
1.31	1.12	0.74	0.70	0.75	0.75	3.64	1.76	1.67

Le (m)	Safe Working Loads in kg Uniform		Def. Limit Span/ 200	Def. Limit Span/ 360	Safe Working Loads in kg Concentrated		Def. Limit Span/ 200	Def. Limit Span/ 360	Safe Column Loads kg at Centroid	Safe Column Loads kg at Face.
Le (m)	Load (kg)	Def. (mm)	Def. Limit Span/ 200	Def. Limit Span/ 360	Load (kg)	Def. (mm)	Def. Limit Span/ 200	Def. Limit Span/ 360	Safe Column Loads kg at Centroid	Safe Column Loads kg at Face.
0.6	166	3.01	165	92	83	2.41	83	57	1738	632
0.7	142	4.09	121	67	71	3.28	71	42	1469	577
0.8	124	5.35	93	52	62	4.28	58	32	1215	521
0.9	110	6.77	73	41	55	5.41	46	25	1003	468
1.0	99	8.35	59	33	50	6.68	37	21	836	420
1.1	90	10.11	49	27	45	8.09	31	17	704	378
1.2	83	12.03	41	23	41	9.63	26	14	600	341
1.3	76	14.12	35	20	38	11.29	22	12	516	309
1.4	71	16.37	30	17	35	13.09	19	11	Le ÷ rxx > 180
1.5	66	18.79	26	15	33	15.04	17	9
1.6	62	21.38	23	13	31	17.10	15	8
1.7	58	24.14	21	11	29	19.32	13	7
1.8	55	27.06	18	10	28	21.64	11	6
1.9	52	30.15	16	9	26	24.12	10	6
2.0	50	33.41	15	8	25	26.73	9	5
2.1	47	36.83	13	7	24	29.47	8	5
2.2	45	40.42	12	7	23	32.35	8	4
2.3	43	44.18	11	6	22	35.34	7	4
2.4	41	48.11	10	6	21	38.49	6	4
2.5	40	52.20	10	5	20	41.77	6	3
2.6	38	56.46	9	5	19	45.17	5	3
2.7	37	60.89	8	5	18	48.70	5	3
2.8	35	65.48	8	4	18	52.39	5	3
2.9	34	70.24	7	4	17	56.19	4	2
3.0	33	75.17	7	4	17	60.13	4	2