MS2125 Slotted

Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 1.4404 (316L) = SS

Loads not applicable to stainless steel, loads for stainless steel available upon request.

6mtr channel is a stock length to be cut down to suit.

Load tables have been calculated using 28×14 slots as this is a worst case.

Area cm²	Wt kg/m	Ixx cm⁴	Zxx (top) cm³	Zxx (btm) cm³	rxx cm	Iyy cm⁴	Zyy cm³	ryy cm
2.00	1.71	0.99	0.91	1.02	0.70	5.28	2.56	1.62

Le (m)	Safe Working Loads in kg Uniform		Def. Limit Span/ 200	Def. Limit Span/ 360	Safe Working Loads in kg Concentrated		Def. Limit Span/ 200	Def. Limit Span/ 360	Safe Column Loads kg at Centroid	Safe Column Loads kg at Face.
Le (m)	Load (kg)	Def. (mm)	Def. Limit Span/ 200	Def. Limit Span/ 360	Load (kg)	Def. (mm)	Def. Limit Span/ 200	Def. Limit Span/ 360	Safe Column Loads kg at Centroid	Safe Column Loads kg at Face.
0.6	216	2.94	216	123	108	2.36	108	77	2490	841
0.7	186	4.00	162	90	93	3.20	93	56	2052	764
0.8	162	5.22	124	69	81	4.17	78	43	1671	688
0.9	144	6.61	98	55	72	5.29	61	34	1368	617
1.0	130	8.16	80	44	65	6.53	50	28	1134	555
1.1	118	9.87	66	37	59	7.90	41	23	953	499
1.2	108	11.74	55	31	54	9.40	35	19	810	451
1.3	100	13.78	47	26	50	11.02	29	16	Le ÷ rxx > 180
1.4	93	15.98	41	23	46	12.79	25	14
1.5	87	18.35	35	20	43	14.68	22	12
1.6	81	20.88	31	17	41	16.70	19	11
1.7	76	23.57	28	15	38	18.85	17	10
1.8	72	26.42	25	14	36	21.15	15	9
1.9	68	29.44	22	12	34	23.55	14	8
2.0	65	32.62	20	11	32	26.10	12	7
2.1	62	35.97	18	10	31	28.77	11	6
2.2	59	39.47	16	9	30	31.58	10	6
2.3	56	43.14	15	8	28	34.51	9	5
2.4	54	46.98	14	8	27	37.58	9	5
2.5	52	50.97	13	7	26	40.78	8	4
2.6	50	55.13	12	7	25	44.11	7	4
2.7	48	59.45	11	6	24	47.56	7	4
2.8	46	63.94	10	6	23	51.15	6	4
2.9	45	68.59	9	5	22	54.87	6	3
3.0	43	73.40	9	5	22	58.73	6	3