MS4115 Slotted

Finish: pre galvanised = PG, post galvanised = HDG, stainless steel grade 1.4404 (316L) = SS

Loads not applicable to stainless steel, loads for stainless steel available upon request.

6mtr channel is a stock length to be cut down to suit.

Load tables have been calculated using 28×14 slots as this is a worst case.

Area cm²	Wt kg/m	Ixx cm⁴	Zxx (top) cm³	Zxx (btm) cm³	rxx cm	Iyy cm⁴	Zyy cm³	ryy cm
1.93	1.61	4.25	2.01	2.10	1.48	6.10	2.96	1.78

Le (m)	Safe Working Loads in kg Uniform		Def. Limit Span/ 200	Def. Limit Span/ 360	Safe Working Loads in kg Concentrated		Def. Limit Span/ 200	Def. Limit Span/ 360	Safe Column Loads kg at Centroid	Safe Column Loads kg at Face.
Le (m)	Load (kg)	Def. (mm)	Def. Limit Span/ 200	Def. Limit Span/ 360	Load (kg)	Def. (mm)	Def. Limit Span/ 200	Def. Limit Span/ 360	Safe Column Loads kg at Centroid	Safe Column Loads kg at Face.
0.6	479	1.52	479	479	239	1.22	239	239	2930	1012
0.7	410	2.07	410	386	205	1.65	205	205	2691	961
0.8	359	2.70	359	296	180	2.16	180	180	2385	899
0.9	319	3.41	319	234	160	2.73	160	146	2082	836
1.0	287	4.21	287	189	144	3.37	144	118	1803	773
1.1	261	5.10	261	156	131	4.08	131	98	1564	714
1.2	239	6.07	237	131	120	4.81	120	82	1364	660
1.3	221	7.12	202	112	110	5.70	110	70	1199	611
1.4	205	8.26	174	97	103	6.60	103	60	1061	567
1.5	192	9.48	151	84	96	7.59	95	53	947	527
1.6	180	10.79	133	74	90	8.63	83	46	850	491
1.7	169	12.18	118	66	84	9.74	74	41	778	463
1.8	160	13.66	105	58	80	10.92	66	37	708	434
1.9	151	15.21	94	52	76	12.17	59	33	Le ÷ rxx > 180
2.0	144	16.86	85	47	72	13.49	53	30
2.1	137	18.59	77	43	68	14.87	48	27
2.2	131	20.40	70	39	65	16.32	44	24
2.3	125	22.30	64	36	62	17.83	40	22
2.4	120	24.28	59	33	60	19.42	37	21
2.5	115	26.34	55	30	57	21.07	34	19
2.6	110	28.49	50	28	55	22.80	32	18
2.7	106	30.72	47	26	53	24.58	29	16
2.8	103	33.04	43	24	51	26.43	27	15
2.9	99	35.44	41	23	50	28.35	25	14
3.0	96	37.93	38	21	48	30.35	24	13